Agilent Technologies 4294A, Руководство по эксплуатации

Страница: 72 / 469

64 Chapter 4
Preparation of Measurement Accessories
Selecting Accessories for Measurement
Selecting Accessories for Measurement
Select the appropriate accessories (test fixture, adapter, probe, cable, etc.) for your
measurement in accordance with Table 4-1. Detailed specifications are described in
catalogs or in the operation manual of each accessory.
Table 4-1 Guidelines for Selecting Accessories
Type of
Device
Condition Accessory Features of Accessory
Lead
component
Entire frequency range of 4294A 16047E Equipped with screws for firmly
fixing the fixture to the 4294A.
Entire frequency range of 4294A 42942A and 16092A For both chip and lead
components.
Entire frequency range of 4294A 42942A and 16093A Two binding-post-type
electrodes set 7 mm apart.
Entire frequency range of 4294A 42942A and 16093B Three binding-post-type
electrodes set 15 mm and
18 mm apart.
Frequency
£
40 MHz 16047C
Frequency
£
40 MHz 16047D For axial and radial lead
components.
Frequency
£
13 MHz 16047A For axial and radial lead
components.
Frequency
£
10 MHz, Balanced
component and circuit measurement
16314A Three binding-post-type
electrodes.
Frequency
£
2 MHz, External dc bias
up to 200 V
16065A For axial and radial lead
components. Equipped with
safety cover.
Frequency
£
100 kHz, Component
terminal diameter
£
15 mm
16089A Two Kelvin clips.
Cable length: approx. 1 m.
Frequency
£
100 kHz, Component
terminal diameter
£
7.9 mm
16089B Two Kelvin clips.
Cable length: approx. 1 m.
Frequency
£
100 kHz, Component
terminal diameter
£
6 mm
16089E Two Kelvin clips.
Cable length: approx. 1 m.
Frequency
£
100 kHz, IC pin
diameter
£
1 mm
16089C Two Kelvin clips.
Cable length: approx. 1 m.
Frequency
£
100 kHz 16089D Four alligator clips.
Cable length: approx. 1 m.