Agilent Technologies 4294A, Руководство по эксплуатации

Страница: 329 / 469

Chapter 9 321
Setting/Using Control and Management Functions
Performing Self-Diagnosis of the Agilent 4294A
9.
Se
ttin
g/Us
in
g Co
ntr
ol and
Man
age
men
t F
unc
tions
currently selected test item is displayed in the set parameter value field in the upper left
area of the screen.
Step 3. Use the keys or rotary knob of the ENTRY block in one of the following ways to specify
the test number for the item whose result you want to check.
• Enter the desired value with the numeric keys (
[0]
to
[9]
) and then press the
[ ´ 1]
unit
key.
• Turn the rotary knob (
m m m m
) until the desired value is set.
• Press the step keys ([
­
][
¯
]) to set the desired value.
The desired test result is displayed at the right of the test number and test item in the set
parameter value field in the upper left area of the screen.
NOTE The power-on self-test automatically executed at power-on is a partial execution of the
“internal tests.” You can also check the result of each test in the power-on self-test by
entering its test number as described above.