ZF Marine ClearCommand 9000 Series, Installation, Operation And Troubleshooting Manual

Page: 38 / 272

OPERATION
Page 2-13
2-12.4.2 Troll Servo Functions
The following functions are available along with Section 2-
11.4 page 2-20 for servo Trolling Valves.
L0 Troll Enable and Control Head Lever Range -
Turns Troll ON (Integrated) and sets the
degrees of Control Head lever movement
dedicated to Troll.
L1
Troll Servo Direction - Determines if the Troll
push-pull cable is retracted or extended at
Lock-up.
L2 Troll Minimum Pressure - Adjusts the Troll push-
pull cables position at minimum Shaft rota-
tion.
L3
Troll Maximum Pressure - Adjusts the Troll push-
pull cable’s position at maximum Shaft rota-
tion (not maximum pressure).
Detail information on each function is found in Section 5-
6.5.2, page 5-24.
2-12.4.3 Integrated Troll Solenoid Functions
The following functions are available along with Section 2-
11.4 page 2-20 for solenoid Trolling Valves.
L0 Troll Enable and Control Head Lever Range -Turns
Troll ON and sets the degrees of Control
Head lever movement dedicated to Troll.
L1
Troll Valve Function - Selects the proper current
range for a particular gear.
This Function
must be the 3rd function set if ZF Hurth
Gears are used.
L2 Troll Minimum Pressure - Adjusts the amount of
current at minimum Shaft rotation.
L3
Troll Maximum Pressure - Adjusts the amount of
current at maximum Shaft rotation (not max-
imum pressure).
Detail information on each function is found in Section 5-
6.5.4, page 5-26.
2-12.5 Troubleshooting Functions
2-12.5.1 Basic Troubleshooting Functions
H0 Diagnostics - Allows the installer/technician to
look at various inputs to the Processor.
H1 Return to Factory Defaults - Returns all settings to
the factory default values.
Detail information on this function is found in Section 5-
6.5.1, page 5-28.
NOTE: T
HE FOLLOWING
T
ROLL
F
UNCTIONS ARE AVAILABLE FOR THE
9001 T
ROLL
A
CTUATOR OR
I
NTE
-
GRATED
S
ERVO
T
ROLL COMMAND
.