ZF Marine ClearCommand 9000 Series, Installation, Operation And Troubleshooting Manual

Page: 120 / 272

SEA TRIALS
Page7-10
7-15.5 Integrated ZF-Hurth Solenoid Trolling
7-15.5.1 Enabling ZF-Hurth Troll
A) Ensure Function Code
C5
(Shift Solenoid Type) value is
set to
01
or
02
(refer to Section 5-6.3.3.1, page 5-27)
.
B) Place the Control System into Troll Mode by pressing
and holding the transfer button for approximately 2 sec-
onds, until the red LED begins blinking rapidly.
C) Move the Control Head lever into the Ahead Detent.
7-15.5.2 Troll Maximum Current Adjustment
Ensure that the current to the Ahead and Astern Solenoids
do not exceed the current rating of the Solenoid.
A) This is accomplished by connecting an amp meter in
series with the Ahead and then the Astern solenoid sig-
nal.
B) Place the Control Head lever into the Ahead and the
Astern detent without Troll selected (Control Head red
LED lit solid).
C) Adjust Function Code
C6
for Ahead and
C7
for Astern
as described in Sections 5-6.3.3.2, page 5-28, and 5-
6.3.3.3, page 5-28.
NOTE:I
T IS STRONGLY RECOMMENDED THAT THE
F
IELD
S
ERVICE
T
EST
U
NIT
(P/N 1400)
IS UTILIZED
WHEN ADJUSTING THE
ZF-H
URTH
S
OLENOID
.