2
2-5
IM 701830-01E
Name and Use of Each Part
CLEAR key (Page 4-7)
Deletes the currently displayed waveform.
COPY key (Chapter 10)
Used for printing out hard copy of the screen data.
If you press
SHIFT
+
COPY
, the screen displays a menu that you can use to print or save the
screen image. For the save location, you can select any of the following: internal printer
(optional), GP-IB interface, or storage medium (floppy, MO, or external SCSI).
KEYBOARD key
Pressing the
KEYBOARD
key displays a screen for entering numerical values. You can use
the 10 keys (channel keys) to enter the values.
FILE key (Pages 11-4 to 11-17)
Displays menu that you use to save to, load from, or execute file operations on floppy disk, MO
disk, or external SCSI device.
MISC key (Pages 3-6, 3-8, 11-18; Chapter 13; IM 701830-11E)
Displays the menu for selecting GO/NO-GO judgment, GP-IB interface, system configuration
settings, system status check, screen saver setting, and the self-diagnostic function.
SHIFT+CLEAR key (IM701830-11E)
Clears the remote state.
HELP key (Page 4-9)
Sets help window ON or OFF.
SHIFT key
Used to make the functions that are marked in purple on the panel operative. Pressing this key
activates shift mode, pressing it again releases shift mode. While the indicator above this key is
lit, the shift mode is active.
ALL CH key (Page 5-25)
Display the setup menu of all channels over the entire screen and set the parameters.
2.2 Operation Keys/Jog Shuttle/Knobs
