1-5
1
IM 701830-01E
Functions
1.2 Setting the Vertical and Horizontal Axes
Bandwidth Limit (For Voltage, Temperature, and Strain Modules)
≡
Page 5-8.
≡
The bandwidth limit of each module can be set individually. By setting a bandwidth limit, the
noise component of the input signal can be deleted during waveform observation.
Zooming in the Vertical Direction
≡
Page 5-10.
≡
Every displayed waveform can be enlarged/reduced by a factor between “x0.1 to x100” in the
vertical direction. Zooming is done with the center at the vertical position.
1div=1V
1div=500mV
When “V Zoom” is switched from “x1” to “x2”
Offset Voltage (For Voltage Modules)
≡
Page 5-11.
≡
Since the signal you wish to see can be moved to the vertical position by adding an offset
voltage, the observation can be made with a higher voltage sensitivity.
Note that the offset value has no affect on cursor measurements, automatic measurements, and
mathematical calculations.
1 V/div,Offset :0V,Position:0div
1 V/div,Offset : -2 V
500 mV/div,Offset : -2 V
Inverted Waveform Display
≡
Page 5-14.
≡
The voltage axis is inverted about the vertical position as shown below, and the waveform is
displayed.
Vertical position
Original waveform (not inverted)
Inverted waveform
