8-13
8
IM 701830-01E
Display
Moving the range in which to perform automatic measurement of waveform
parameters: Fit Measure Range
Pressing the “Fit Measure Range...” soft key moves the range in which to perform the automatic
measurement of waveform parameters to the ends of the Z1 or Z2 waveform display frame.
Whether it moves to the ends of the Z1 frame or the Z2 frame depends upon how the zoom
waveform is being displayed. See below.
• If the mode is “Main&Z1,” “Z1 Only,” “Main&Z1&Z2,” or “Z1&Z2,” it moves to the Z1
waveform display frame.
• If the mode is “Main&Z2” or “Z2 Only,” it moves to the Z2 waveform display frame.
Page Scroll
You can scroll the display of the waveform to the left or to the right. Pressing the “
Page
Scroll
” soft key moves the displayed position by one screen in the direction specified in “
Page
Scroll Direction
.” You can page scroll when only the original waveforms (main waveforms)
are displayed.
>> : Move the waveform display position to the right on the screen.
<< : Move the waveform display position to the left on the screen.
Operating Procedure
Set the zoom display format
1.
Press the
ZOOM
key.
2.
Press the “
Mode
” soft key as necessary to set the zoom mode (Main, ..., Z1&Z2).
Select the waveforms for zooming
3.
Press the “
Allocation
” soft key to produce the allocation menu.
4.
Move the cursor to the trace to zoom with the jog shuttle, and press
SELECT
key to turn it ON.
Set the zoom display mode
5.
Press the “
Zoom Format
” soft key as necessary to select the mode (One, ..., Octal).
Set the zoom rate
6.
Press the “
Z1 Mag
” or “
Z2 Mag
” soft key to enable the jog shuttle. Then turn the jog
shuttle to set the desired zoom rate (magnification).
Set the zoom positions
7.
Press the “
Z1 Position/Z2 Position
” soft key to set the jog shuttle action to “
Z1
Position
,” then turn the jog shuttle to set the position. Set the Z2 position in the same way.
Setting the display position of an original waveform
8.
Press the “
Main Position
” soft key to enable the jog shuttle.
9.
Move the display position of the original waveform with the jog shuttle.
Set the linkage (when Main&Z1&Z2 mode only)
10.
Press the “
Z1 Position/Z2 Position
” soft key several times. If both “
Z1 Position
” and
“
Z2 Position
” are
, “
Z1 Position/Z2 Position
” moves without the distance between
them changing.
Moving the range of automatic measurement of waveform parameters
11.
Pressing the “
Fit Measure Range...
” soft key moves the range to the ends of the zoom
waveform display frame.
Z1 box
Z2 box
T/div of Z1
8.9 Zooming the Waveform
