11-7
11
IM 701830-01E
Saving/Loading the Data/Connecting to the PC
11.5 Selecting the Medium and Directory
Function
Selecting the media
You can save waveform and setting data to three storage locations:
Floppy disk (FD)
Internal hard disk (HD)
External SCSI device (SCSI)
* Internal hard disk and SCSI interface are options.
* When selecting the external SCSI device, have the “External ID” set to the ID number of the
appropriate device. For details, refer to Section 11.12 “Changing the SCSI IDs.”
Directory creation
The instrument automatically creates the following three directories for data saves: DL_WAVE,
DL_SETUP, and DL_MISC. On HD and SCSI devices, these directories are created within a
single higher directory (a “high level” directory). When a directory is created, a directory with
name DIR1 to DIRn (n is the maximum number of directories that can be created on the current
media) is automatically created.
/
DIR1
DL_WAVE
DL_SETUP
DL_MISC
(Root)
DIR2
•
•
•
Selecting the directory for saving or loading
Since the MO disk or external SCSI device can make multiple high-level directories, you must
select the appropriate target directory when saving or loading data.
You select the directory by its number. Directory numbers run from 1 up to the maximum
number of directories supported by medium.
Operating Procedure
Selecting the medium
1.
Press the
FILE
key.
2.
Press the “
Function
” soft key until “
Media
” is selected.
3.
Press the “
Media
” soft key as necessary to select “
FD
”, “
SCSI
”, or “
MO
.”
4.
Press the “
Set Media
” soft key to register the new selection.
Creating directories (to HD or SCSI only)
5.
Pressing the “
Add Dir
” soft key creates one directory.
Selecting the target directory
5.
Press the “
Change Dir to
” soft key to set the jog shuttle action to “
Change Dir to
.”
6.
Turn the jog shuttle to select the directory number.
7.
Press the “
Change Dir
” soft key to change to the selected directory.
