11-21
11
IM 701830-01E
Saving/Loading the Data/Connecting to the PC
File list
You can view the file list (Filelist.vol) of the internal hard disk and floppy disk of this
instrument, and SCSI device connected to this instrument, on a PC. Do not delete or alter the
data in this file. If you do so, the instrument will not be able to recognize the data. If you
happen to delete or alter the file list data, follow the procedures below to create a correct file
list.
1.
Delete the file list (Filelist.vol) on the PC.
2.
Perform steps 1 to 4 in section “11.5 Selecting the Medium and Directory” on the
instrument.
Drive letter
When the instrument is connected to a PC, the hard disk on the instrument is assigned drive
letters that follow the drive letters of the PC's hard disk (such as D: and E:). For details, refer to
the instruction manual of the PC or the drive.
Note that the drive letter of the instrument can not be changed.
Example
• When using the PC’s internal hard disk as one drive
Before connection C: (HDD)
After connection
C: (HDD)
D: (this instrument)
• When using the PC’s internal hard disk as two drives
Before connection C: (HDD)
D: (HDD)
After connection
C: (HDD)
D: (HDD)
E: (this instrument)
Actually, this varies depending on how the hard disk is partitioned or on the different types of
interface types (IDE, SCSI, etc.) or on the drive types.
Note
• The instrument must connect to the end of the SCSI chain, as the internal hard disk includes a built-in
terminator.
• When the instrument is connected to a PC, it is recommended that the device at the end of the SCSI
chain have the terminator turned ON.
11.13 Connecting to a PC
