YOKOGAWA DL716, User Manual

Page: 96 / 255

5-24
IM 701830-01E
5.16 Using the Linear Scaling Function for the Strain
When “ P1–P2 ” is selected
4. Press the “ P1:X/P1:Y ” soft key and set the jog shuttle action to “ P1:X .” “ P1:X ” is
displayed in the “ Get Measure ” soft key.
5. Press the “ Get Measure ” soft key to read in the measured value into P1:X or set the value
with the jog shuttle.
You can change the setting a digit using the arrow keys.
6. Press the “ P1:X/P1:Y ” soft key again and set the jog shuttle action to “ P1:Y .”
7. Set the scale value P1:Y with the jog shuttle.
You can change the setting a digit using the arrow keys.
8. Press the “ P2:X/P2:Y ” soft key and set the jog shuttle action to “ P2:X .” “ P2:X ” is
displayed in the “ Get Measure " soft key.
9. Press the “ Get Measure ” soft key to read in the measured value into P2:X or set the value
with the jog shuttle.
You can change the setting a digit using the arrow keys.
10. Press the “ P2:X/P2:Y ” soft key again and set the jog shuttle action to “ P2:Y .”
11. Set the scale value P2:Y with the jog shuttle.
You can change the setting a digit using the arrow keys.
Set the unit
If necessary, press the “ Units ” soft key to display the keyboard, then input the name of the unit.
For the procedures on entering character strings, see section 4.1 “Entering Values and Character
Strings.”