10-4
IM 701830-01E
10.3 Outputting to Printer
Function
Output type
Following three output types are available for printing to the built-in printer.
• Normal : The display screen is printed in normal size. Split Mode settings cannot be made.
• Long
: Enlarge the waveform displayed on the screen by a factor of 2 to 50 taking 10 div
on the time axis to be one page and print (long copy)
The following magnifying factors are available. Depending on the T/div setting, the factor
becomes the value indicated in ( ).
×
2 (2.5),
×
5 (4),
×
10,
×
20 (25),
×
50 (40)
• All
: When the display record length is shorter than the record length, the display record
length is taken to be one screen. The number of screens equivalent to (record
length
÷
display record length) is output. Split mode settings cannot be made.
Split print ON/OFF
When this is turned “ON” when each waveform is displayed in its separate window, each
window is zoomed in the vertical direction and printed as a full page. The printing is repeated
for every split window. This is useful when the waveform becomes too small because there are
too many split displays.
Comment
By entering a comment string using up to 30 characters and displaying it on the bottom section
of the screen, it can be printed at the time of the print.
Points for attention
• No data can be output to the printer during acquisition.
• When both pre-zoom waveform and zoomed waveform are displayed, only the pre-zoom
waveform is applicable to long copy.
• When displaying the waveform with the history memory function, only the waveform
selected with “Selected Record No.” is applicable to long copy.
• Long copy cannot be carried out during X-Y waveform display.
Operating Procedure
Selecting the printer
1.
Press the
SHIFT
key. Functions marked in purple on the panel are now operative.
2.
Press the
COPY
key.
3.
Press the “
Copy to
” soft key to display the output media menu.
4.
Keep pressing the “
Copy to
” soft key until “
Printer
” is selected.
