14-6
IM 701830-01E
Selecting the memory to be tested and executing memory test
6.
Press the “
Memory Test
” soft key to display the memory item menu.
7.
Keep pressing the “
Memory Test
” soft key to select “
System
” or “
ACQ RAM
.”
8.
Press the “
Exec
” soft key to start the memory test.
→
Executing the key test
9.
After step 3, press the “
Test Item
” soft key to select “
Key Board
.”
10.
Press the “
Exec
” soft key to start the key test.
11.
To stop the key test, press the
SHIFT+ESC
key.
Executing the printer test
12.
After step 3, press the “
Test Item
” soft key to select “
Printer
.”
13.
Press the “
Exec
” soft key to start the printer test.
Executing the floppy disk drive test
14.
Insert a formatted floppy disk (1.44 MB or 1.2 MB).
15.
After step 3, press the “
Test Item
” soft key to select “
FDD
.”
16.
Pressing the “
Exec
” soft key will start the test.
Executing the hard disk drive test
17.
After step 3, press the “
Test Item
” soft key and select “
HDD
.”
18.
Pressing the “
Exec
” soft key will start the test.
Note
• If a floppy disk is not inserted when executing the floppy disk drive test, “Failed” is displayed.
• If the power of the internal hard disk is turned OFF (HDD Motor to OFF) when executing the hard disk
drive test, “Failed” is displayed.
• Back up the data in the floppy disk or the hard disk as a safety measure.
14.3 Self-Diagnostic Test (Self Test)
