YOKOGAWA DL716, User Manual

Page: 117 / 255

6-20
IM 701830-01E
Operating Procedure
Set the trigger type
1.
Press the
ENHANCED
key.
2. Press the “ Type ” soft key to open the Trigger Type menu.
3. Press the “ Type ” soft key as necessary to select Window.
Set the trigger condition
4.
Press the “ Set Pattern ” soft key to open the trigger condition menu.
5. Turn the jog shuttle and move the cursor to CH“ 1 ” of <Window OR>.
6. Press the
SELECT
key to display the CH“ 1 ” menu of <Window OR>.
7. Press the same
SELECT
key several times to select “ ,” “ ,” or “-.”
Select the waveform
8.
Press the “ Select CH ” soft key to select the desired waveform from channels “ CH1 ” to
“ CH16 .”
Set the window center
9.
Press the “ Center/Window Width ” soft key as necessary to set the jog shuttle action to
“ Center ”.
10. Turn the jog shuttle to set the center level.
Set the width
11.
Press the “ Center/Window Width ” soft key as necessary to set the jog shuttle action to
“ Window Width ”.
12. Turn the jog shuttle to set the width.
Other settings
13.
You must also set the following parameters: trigger mode, trigger hysteresis and holdoff
time. For information about how to set these parameters, refer to Sections 6.1 to 6.7.
6.14 Setting the Window Trigger (ENHANCED)