2
2-1
IM 701830-01E
Name and Use of Each Part
2.1
Front Panel/Rear Panel
Trigger output terminal (Page 12-2)
Power switch (Page 3-5)
Power connector (Page 3-4)
External clock input terminal (Page 4-11)
External trigger input terminal
(Page 6-2 and 12-1)
SCSI connector
Connects to an external hard disk, MO disk, or other external
SCSI storage
device
. This connector can also be used to
connect to a PC using SCSI.
VIDEO OUT terminal (Page 12-3)
Floppy disk drive (Chapter 11)
Input terminals (Page 3-9 to 3-14)
Terminal for connecting probes and measurement cables.
RS-232 connector
Connects to external plotter. (Page 10-8)
For details about communication functions, refer to the instrument Communication Interface Manual (IM 701830-11E).
Centronics connector
Connects to a printer with a Centronics interface.
• Side pannel
Jog shuttle
Changes the selected value or moves the cursor. The outer
shuttles ring (outer ring) for fast setting increment.
LCD screen
Menu keys (Page 2-4)
Press a key to display the
corresponding menu.
ESC key
Closes pop-up menu or soft key menu.
Functional earth terminal
Earth connection used for probe compensation.
COMP output (Page 3-15)
Outputs probe compensation signal.
VERTICAL group (Page 2-3)
Menu group used to make vertical axis.
HORIZONTAL group (Page 2-3)
Menu group used to make horizontal axis.
TRIGGER group (Page 2-3)
Menu group used to make trigger settings.
• Front panel
Functional earth terminal
This terminal is used when connecting the GND cable of the
high-voltage differential probe (700925, sold separately) and
also to enhance grounding for making measurements.
16ch DIGITAL SCOPE
PROTECT
COPY MENU
KEYBOARD
FILE
MISC
HELP
SHIFT
ALL CH
SIMPLE
ENHANCED
POSITION
/DELAY
TRIGGER
V / D I V
TIME/DIV
CH
1
SETUP
ACQ
STAET/STOP
CAL
X-Y
DISPLAY
MEASURE
CURSOR
RESET
SELECT
HISTORY
ESC
MATH
REPLAY
ZOOM
CH
2
CH
3
CH
4
CH
5
CH
9
CH
10
CH
11
CH
12
CH
6
CH
7
CH
8
7 LOG/C1
8
9
EXP
4
5
6
m
1
CH
13
CH
14
CH
15
CH
16
0
ENTER
2
3
µ
LOG/C2
HORIZONTAL
VERTICAL
TRIG D
CLEAR
SNAP SHOT
CENTRONICS
OPTIONAL
LOGIC 1
INPUT
A
INPUT B
INPUT
A
INPUT B
GP-IB(IEEE488)
SERIAL(RS-232)
GO-NOGO
EXT CLK IN
TRG OUT
TRG IN
SCSI
VIDEO-OUT(VGA)
ON
OFF
POWER
100-120V/200-240V AC
250VA MAX 50/60Hz
OPTIONAL
LOGIC 2
Extended logic input terminal (page 3-13, 3-14)
GO-NOGO output terminal
GP-IB connector
Connects to external plotter. (Page 10-8)
For details about communication functions, refer to the instrument
Communication Interface Manual (IM 701830-11E).
Chapter 2
Name and Use of Each Part
