Xerox WorkCentre 490cx, User Manual

Page: 88 / 320

2-4 Making a Copy
Note: If you want to change the contrast or copy size, refer to Changing
Copy Setup on page 2-5.
4
Press the Collate button, then press 1 on the keypad. This turns on
copy collation.
Note: After making a copy, collation is turned off. If you want to collate
again, you must turn collation on again.
5
For Normal collation, press 1. To reverse the copy from the order of the
original document, press 2. For more information on collation, refer to
Collating and Sorting on page 2-7.
6
Using the keypad, enter the desired number of copies.
Note: Do not enter more than two digits (1 - 99) or the machine will only
accept the last two digits, or it will attempt to place a phone call to the digits
entered.
7
Press the Start button. The machine will make the selected number
of copies.