Xerox WorkCentre 490cx, User Manual

Page: 162 / 320

4-4 Receiving a Fax
Determining the Reception Mode
The current reception mode is displayed in the bottom line of the LCD
display window after pressing the Receive Mode
button. The
selections are FAX, ANS/FAX, TEL, and DRPD. (DRPD is displayed only
if previously setup. Refer to Distinctive Ring Pattern Detection (DRPD) on
page 4-9).
If you seldom use the fax line for phone conversations, set the
WorkCentre 490cx to FAX mode . In this mode, the WorkCentre 490cx
answers incoming calls and receives faxes automatically.
Note: During PC file printing, an incoming fax will be received and stored
in memory. The memory is also used for PC file printing. If you are printing a
large PC file, it is recommended that you stop PC file printing while
receiving a fax. This will maximize memory space for the incoming fax.
READY 08:30AM
RECEIVE MODE FAX