Xerox WorkCentre 490cx User Manual Download

Page: 66 / 320

1-54

Getting Started

Press the Start

button when the date and time settings displayed are

correct.

The display indicates the date and time you have set, then returns to
Standby mode.

Note: If an invalid number is entered, the machine beeps and does not
proceed to the next step. If this happens, enter the correct number.

Setting the System ID (Your Number and Name)

In some countries you are required by law to indicate your fax number on
any fax you send.

The System ID, containing your telephone number and

name, will be printed at the top of each page sent from your machine.

Press the Menu

button, then press the 0 + 2 buttons on the keypad.

Then press the Start

button. SYSTEM NUMBER appears in the

LCD display. A flashing cursor in the display prompts you to enter the
telephone number.

Note: If there is a number previously registered, it appears in the display.

Summary of Contents for WorkCentre 490cx

































































































































































































































































































































Search results

Summary of Contents for WorkCentre 490cx

Reviews:

Related manuals for WorkCentre 490cx

Brands by name

Popular brands

Xerox WorkCentre 490cx, User Manual

Search results

Summary of Contents for WorkCentre 490cx

Reviews:

Related manuals for WorkCentre 490cx

Brands by name

Popular brands