Xerox WorkCentre 490cx, User Manual

Page: 78 / 320

1-66 Getting Started
Press 3 to enable vertical only RX Reduction. The machine will reduce
an incoming page containing overflow data along the vertical axis only.
The net effect will be a vertical compression of the image as shown
below:
• DISCARD SIZE - When receiving or copying a document as long as or
longer than the paper installed in your fax machine, you can set the fax
machine to discard any excess image at the bottom of the page, to fit
into the recording paper size.
If the received page is outside the margin you set, it will be printed on
two sheets of paper at the actual size.
If the data is within the margin, and the Auto Reduction feature is
turned ON, it will be reduced to fit into the appropriate size paper
(Discard does not take place). If the Auto Reduction feature is turned
OFF or fails, the data within the margin will be discarded.
Using the number keypad, enter the desired discard size (0-30 mm), and
press the Start button to store your selection.
Original
Received Data