Xerox WorkCentre 490cx User Manual Download Page 258

Page: 258 / 320

8-20

Maintenance

Insert the ink cartridge in the cartridge holder, then push the ink
cartridge firmly to the rear of the machine until it clicks into place.

If the ink cartridge moves loosely in the carrier, it has not clicked into place.
Repeat this step.

Close the cover and the control panel.

The LCD displays CARTRIDGE CHANGED? NO. Select the desired

action item using the Up

and Down

buttons.

If you

Select

did not change any cartridge

CARTRIDGE
CHANGED? NO

changed a color cartridge

CARTRIDGE
CHANGED? LEFT

changed a black cartridge

CARTRIDGE
CHANGED? RIGHT

changed a color and a black cartridge

CARTRIDGE
CHANGED? BOTH

Summary of Contents for WorkCentre 490cx

































































































































































































































































































































Search results

Summary of Contents for WorkCentre 490cx

Reviews:

Brands by name

Popular brands

Xerox WorkCentre 490cx, User Manual

Search results

Summary of Contents for WorkCentre 490cx

Reviews:

Brands by name

Popular brands