manualshive.com logo in svg

Xerox WorkCentre 490cx, User Manual

Share
Download
Xerox WorkCentre 490cx User Manual Download Page 171

Polling

4-13

4

6

If the remote machine is secured with a poll code, you must enter the 

correct code, and press the Start 

 button.  This would be provided by 

the remote operator (user).

Or

If the remote machine is not secured with a poll code, or does not have 

this feature, press the Start 

 button to accept [0000] which 

represents no code.

The display prompts for the time range, during which the machine will call 
and poll the remote machine(s).

Enter the time duration for polling.

7

Press the Start 

 button.

Note: If you set a time earlier than the current time, your machine calls the 
number at that time on the following day.

 START -> END (24H)

    HH:MM -> HH:MM

Summary of Contents for WorkCentre 490cx

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands