Vigilantplant TDLS8000, User Manual

Page: 168 / 320

<8. YH8000 HMI Unit>
8-17
IM 11Y01D01-01EN 3rd Edition: Jun. 10, 2016-00
Enter the password on the password input screen, and tap to display the TDLS8000
configuration screen.
Configuration menu
Execution menu
Figure 8.20 TDLS8000 configuration screen
Execution menu
The execution operation screens for calibration, validation, loop check, and the like are
under this menu.
Configuration menu
Various settings are under this menu.
The TDLS8000 configuration screen is arranged a menu tree structure.
• For the menu structure, see “Appendix 4 YH8000 Menu Tree”.
• For details on various settings, see “6.
Configuration”.
• For details on calibration and validation, see “9. Inspection and Maintenance”.
• For details on loop check, see “5.4 Loop Check (Simulation output)”.
NOTE
TDLS8000 status
When you switch to the TDLS8000 configuration screen, the TDLS8000 status is set to “in
maintenance.” While in maintenance, the TDLS8000 cannot be configured from other YH8000s
or HART. Tap any of the buttons at the bottom of the screen to exit from the TDLS8000
configuration screen. When you exit from the configuration screen, “in maintenance” is cleared.
“In maintenance” is also cleared when the connection to the TDLS8000 is disconnected.
NOTE
Password
The factory default password for switching to the TDLS8000 configuration screen is “1234.” You
can change the password on the following configuration screen.
“ >>[Analyzer]>>Configuration>>System>>Password”
For the password, you can set a character string consisting of one to eight characters of your
choice.
Keep the password in a safe place.