Vigilantplant TDLS8000, User Manual

Page: 148 / 320

<7. HART Communication>
7-9
IM 11Y01D01-01EN
Group Status Attribute Description
Group 1 Transmission Low (AL-01) Warning See “10.2 Warning Display and
Handling”.
Pressure Low (AL-02)
Pressure High (AL-03)
Temperature Low (AL-04)
Temperature High (AL-05)
Conc Gas1 Low (AL-06)
Conc Gas1 High (AL-07)
Conc Gas2 Low (AL-08)
Group 2 Conc Gas2 High (AL-09)
LU Temp Low (AL-10)
LU Temp High (AL-11)
SCU Temp Low (AL-12)
SCU Temp High (AL-13)
Validation Required (AL-14)
Validation Error (AL-15)
Zero Cal Error (AL-16)
Group 3 Span Cal Error (AL-17)
Non Process Alarm (AL-19)
AI-1 (Pres) Low (AL-20)
AI-1 (Pres) High (AL-21)
AI-2 (Temp) Low (AL-22)
AI-2 (Temp) High (AL-23)
External Alarm (AL-24)
Group 4 Clock Adj Required (AL-25)
Setting File Error (AL-26)
Calib File Error (AL-27)
Group 6 Laser Md Temp Low (AL-45) Fault See “10.1 Fault Display and
Handling”.
Laser Md Temp High (AL-46)
Laser Temp Low (AL-47)
Laser Temp High (AL-48)
Group 7 Detect Signal High (AL-49) Warning See “10.2 Warning Display and Handling”.
Peak Center OOR (AL-50) Fault See “10.1 Fault Display and
Handling”.
Ref Peak Height Low (AL-51)
Absorption High (AL-52)
Warning See “10.2 Warning Display and Handling”.
Transmission Lost (AL-53) Fault See “10.1 Fault Display and
Handling”.
Ref Trans Low (AL-54)
R Peak Height High (AL-55)
Outlier Reject Lmt (AL-56)
Warning See “10.2 Warning Display and Handling”.
Group 8 Laser Unit Fail (AL-57) Fault See “10.1 Fault Display and
Handling”.
Inter Comm Fail (AL-58)
Laser Module Error (AL-59)
File Access Error (AL-60)
EEPROM Error (AL-61)
LU Connect Error (AL-62)
FPGA Failure (AL-63)
Program Error (AL-64)
Group 9 Warm-up Status Warming-up
Maintenance mode Maintenance
Group 10 Zero Cal Zero calibration
Span Cal Span calibration
Offline Val Off-line validation
Online Val Online validation
AI-1 (Pres) Cal AI-1 (pressure input) calibration
AI-2 (Temp) Cal AI-2 (temperature input) calibration
3rd Edition: Jun. 10, 2016-00