Vigilantplant TDLS8000, User Manual

Page: 139 / 320

<6. Configuration>
6-24
IM 11Y01D01-01EN
l
Offline validation (*1)
Parameter Initial value Min. – Max.
Pressure mode for offline validation 1 Process parameter Select in the screen
Temperature mode for offline validation 1 Process parameter Select in the screen
OPL mode for offline validation 1 Process parameter Select in the screen
Pressure fixed value for offline validation 1 101.325[kPa] 0.1 – 10,000[kPa]
Temperature fixed value for offline validation 1 25[deg C] -273 – 3,000[deg C]
OPL fixed value for offline validation 1 0.66[m] 0.01 – 100[m]
Gas1 concentration value for offline validation 1 200,000[ppm] 0 – 1E6[ppm](*2)
Gas2 concentration value for offline validation 1 200,000[ppm] 0 – 1E6[ppm](*2)
Gas type for offline validation 1 Gas 1 Select in the screen
Auto offline validation 1 time initiate Disable Select in the screen
Auto offline validation 1 time initiate cycle (day) 0 (=Disable) 0 – 999
Auto offline validation 1 time initiate cycle (hour) 0 (=Disable) 0 – 23
Auto offline validation 1 time initiate base clock 2010/01/01 00:00:00 2010/01/01 00:00:00 –
2068/12/31 23:59:59
Auto offline validation 1 gas purge time 600[s] 0 – 10,000[s]
Auto offline validation 1 process purge time 600[s] 0 – 10,000[s]
Auto valve control for manual offline validation 1 Disable Select in the screen
Auto offline validation 1+2 time initiate Disable Select in the screen
Auto offline validation 1+2 time initiate cycle (day) 0 (=Disable) 0 – 999
Auto offline validation 1+2 time initiate cycle (hour) 0 (=Disable) 0 – 23
Auto offline validation 1+2 time initiate base clock 2010/01/01 00:00:00 2010/01/01 00:00:00 –
2068/12/31 23:59:59
*1: The initial value for the parameters related to “offline validation 2” is the same as those for “offline validation 1.”
*2: Zero is not allowed.
l
Online validation (*1)
Parameter Initial value Min. – Max.
Temperature mode for online validation 1 Active ambient Select in the screen
Temperature ambient offset for online validation 1 -2.2 [deg C] -100 – 100 [deg C]
Pressure value for online validation 1 101.325[kPa] 0.1 – 10,000[kPa]
Temperature fixed value for online validation 1 25 [deg C] -273 – 3,000 [deg C]
OPL value for online validation 1 0.1306[m](*2) 0.01 – 10[m]
Gas1 concentration value for online validation 1 200,000[ppm] -1E6 – 1E6[ppm]
Gas2 concentration value for online validation 1 200,000[ppm] -1E6 – 1E6[ppm]
Gas type for online validation 1 Gas 1 Select in the screen
Auto online validation 1 time initiate Disable Select in the screen
Auto online validation 1 time initiate cycle (day) 0 (=Disable) 0 – 999
Auto online validation 1 time initiate cycle (hour) 0 (=Disable) 0 – 23
Auto online validation 1 time initiate base clock 2010/01/01 00:00:00 2010/01/01 00:00:00 –
2068/12/31 23:59:59
Auto online validation 1 validation gas purge time 600[s] 0 – 10,000[s]
Auto online validation 1 normal gas purge time 600[s] 0 – 10,000[s]
Auto valve control for manual online validation 1 Disable Select in the screen
Reading mode for online validation 1 Validation Select in the screen
Concentration output factor during online validation 1 1.0 -9.9 – 9.9
*1: The initial value for the parameters related to “online validation 2” is the same as those for “online validation.”
*2: The parameter may be initialized to a value different from the one shown because the initial value differs depending on the
measurement target gas (application) of the TDLS8000.
l
Concentration offset
Parameter Initial value Min. – Max.
Concentration offset for gas1 0[ppm] -1E6 – 1E6[ppm]
Concentration offset for gas2 0[ppm] -1E6 – 1E6[ppm]
3rd Edition: Jun. 10, 2016-00