Vigilantplant TDLS8000, User Manual

Page: 281 / 320

<Appendix 8 Explosion Protected Type Instrument>
App.8-12
IM 11Y01D01-01EN
(3) Operation
WARNING
• Electrostatic charge may cause an explosion hazard. Avoid any actions that cause the
generation of electrostatic charge, such as rubbing with a dry cloth on coating face of
product.
• Take care not to generate mechanical sparking when access to the instrument and
peripheral devices in hazardous locations.
(4) Maintenance and Repair
WARNING
The instrument modification or parts replacement by other than authorized Representative of
Yokogawa Electric Corporation is prohibited and will void the certification.
When opening the cover, the enclosure should be dry and clean to prevent from ingress water or
dust.
l
TDLS8000-D1 (FM Approval for US)
(1) Technical data
• Applicable standards
Class 3600: 2011
Class 3615: 2006
Class 3616: 2011
Class 3810: 2005
NEMA 250-2003
ANSI/ISA-60079-0-2013
ANSI/ISA-60079-1-2009 (R2013)
ANSI/ISA-60079-31-2013
ANSI/IEC 60529-2004 (R2011)
• Ratings:
Explosionproof for
Class I; Division 1; Groups A, B, C, D; T5
Dust-Ignitionproof for Class II/III; Division 1; Groups E, F, G; T5
Class I, Zone 1, AEx d IIC T5
Zone 21, AEx tb IIIC T100 °C
• Enclosure: Type 4X, IP66
• Specific condition of use:
- Flamepath joints are not for repair. Contact the manufacturer.
- Precautions shall be taken to minimize the risk from electrostatic discharge or
propagating brush discharge of painted parts of the enclosure.
3rd Edition: Jun. 10, 2016-00