Vigilantplant TDLS8000, User Manual

Page: 111 / 320

<5. Startup>
5-20
IM 11Y01D01-01EN
5.3.6 Setting Process Alarms
You can set threshold values of the high/low limit alarm (warning) for process measurement
values. The following table shows the types of warnings that you can specify. For each type of
warning, you can set the threshold values and select whether to enable the detection. For details
on warnings, see “10.2 Warning Display and Handling” described later.
Alarm number Warning name
1 Transmission Low
2 Process Pressure Low
3 Process Pressure High
4 Process Temperature Low
5 Process Temperature High
6 Concentration Gas1 Low
7 Concentration Gas1 High
8 Concentration Gas2 Low (only with two-gas measurement)
9 Concentration Gas2 High (only with two-gas measurement)
l
Setup procedure using HART
(1) From the menu, select “Detailed setup>>Alarm>>Warning>>Warning group 1.”
The following screen will appear.
(2) “Warn select group 1” is used to enable or disable the warnings. By factor default, all
warnings are enabled.
Select “Warn select group 1” and press the right arrow button to display the following
screen. Here, you can enable or disable each warning.
ON means enabled. To switch between ON and OFF, tap OFF (center-left at the bottom of
the screen). When you are finished, tap ENTER.
3rd Edition: Jun. 10, 2016-00