manualshive.com logo in svg

Vigilantplant TDLS8000, User Manual

Share
Download
Vigilantplant TDLS8000 User Manual Download Page 165

 

 

<8.  YH8000 HMI Unit>

8-14

IM 11Y01D01-01EN

Reference cell absorption spectrum

 

Shows the absorption spectrum of the reference cell. This can be shown only on a 

TDLS8000 with a valid reference cell.

Spectrum capture

 

Records spectrum waveform data to the TDLS8000 internal storage. Do not use this under 

normal circumstances. Use it only if you receive a request from your Yokogawa service 

representative.

NOTE

The spectrum screen is used by Yokogawa service representatives for troubleshooting purposes. 

You may be asked to check this screen depending on the situation. In such a case, please 

operate the screen according to their instructions.

8.5.5 

Alarm History Screen

The alarm history screen can be used to check alarms and messages that occurred in the past. 

Tapping Log Book on the 

 information screen and then Alarm History displays the alarm 

history screen.

The maximum number of history events that you can view on the YH8000 is 99. For details on 

alarms, see “10. 

Troubleshooting”. For details on messages, see “9.12  Alarm History”.

Alarm icon

List line number

Alarm number

Timestamp

Alarm description

Status

Sub number

Scroll up a page

Scroll up a line

Scroll down a line

Scroll down a page

Figure 8.16 

Alarm History Screen

Alarm icon

 

Nothing is displayed for messages. While the alarm is active, the icon appears bright. When 

the alarm is cleared, the icon changes to a dark indication.

Status

 

“On” is displayed when the alarm is active, and “Off” when it is cleared.

3rd Edition: Jun. 10, 2016-00

Summary of Contents for TDLS8000

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands