Vigilantplant TDLS8000, User Manual

Page: 137 / 320

<6. Configuration>
6-22
IM 11Y01D01-01EN
l
Digital input
Parameter Initial value Min. – Max.
Filter time 0.5[s] Select in the screen
DI item selection Disable Select in the screen
l
Valve
Parameter Initial value Min. – Max.
Valve usage Cal/Val Select in the screen
Initial stream Stream 1 Select in the screen
Next stream of stream switching by time duration Disable Select in the screen
Time duration of next stream 60[min] 1 – 1,440[min]
l
Loop check
Parameter Initial value Min. – Max.
Test auto release time 30[min] Select in the screen
l
System
Parameter Initial value User
specification
Min. – Max.
User averaging number 1 1 – 32(*1)
Analyzer tag Blank ○ ASCII 32 characters
Analyzer IP address 192.168.1.10 IPv4 address
Subnet mask 255.255.255.0 IPv4 address
Default gateway address 192.168.1.254 IPv4 address
HMI user password 1234 ASCII 8 characters
LCD spectrum display mode Hide Select in the screen
LCD backlight brightness 10 0 – 10
LCD contrast 5 0 – 10
LED brightness 10 0 – 10
*1: The maximum value varies depending on the measurement target gas (application). Normally, it is 16.
l
HART parameters
Parameter Initial value Min. – Max.
Polling address 0 0 – 63
Loop current mode Enable Select in the screen
Write protect password All space ASCII 8 characters
Short tag All space 8 characters (*1)
TV item Temperature Select in the screen
QV item Transmission Select in the screen
Response preamble number 5 5 – 20
Memo 1/ Memo 2/ Memo 3 All space ASCII 32 characters
Message All space 32 characters (*1)
Descriptor All space 16 characters (*1)
Trim Who/Trim Desc/Trim Loc All space ASCII 16 characters
Date/Trim date 1900/01/01 1900/01/01 –
2155/12/31
Configuration locked status mask Off Select in the screen
*1: Uppercase letters, numbers, and symbols can be entered.
3rd Edition: Jun. 10, 2016-00