Vigilantplant TDLS8000, User Manual

Page: 32 / 320

<2. Specifications>
2-7
IM 11Y01D01-01EN
Power consumption: Max.12 W
Safety and EMC conforming standards:
Safety Conforming Standards:
CE EN61010-1
UL UL61010-1
CSA CAN/CSA-C22.2 No.61010-1
GB GB30439 Part 1
Installation Altitude: 2000 m or less
Installation category: I (Anticipated transient overvoltage 330 V)
Pollution degree: 2, Indoor/Outdoor use
EMC Conformity Standards:
CE EN55011 Class A Group 1
EN61326-1 Class A Table 2 (For use in industrial location)
RCM EN55011 Class A Group 1
KC KN11 Class A Group 1, KN61000-6-2 (Korea Electromagnetic Conformity)
l
Hazardous area classifications
Division 2, Zone2: Nonincendive/Type n
YH8000-D2 (FM Approval for US)
Division system
Type of protection: Nonincendive for Class I, Division 2, Groups A, B, C, D, T5
Enclosure rating: Type 4X
Applicable standards: FM Class 3600: 2011, FM Class 3611: 2004, FM Class 3810:
2005, NEMA 250: 2003
Zone system
Type of protection: Class I, Zone 2, AEx nA ic IIC T5
Enclosure rating: IP65
Applicable standards: ANSI/ISA-60079-0-2013, ANSI/ISA-60079-11-2014, ANSI/ISA-
60079-15-2012, ANSI/IEC 60529-2004 (R2011)
YH8000-C2 (FM Approval for Canada)
Type of protection: Ex nA nL IIC T5
Enclosure rating: IP65, Type 4X
Applicable standards: CAN/CSA-C22.2 No. 0-10 (R2015), CAN/CSA-C22.2 No. 94.1-07
(R2012), CAN/CSA-C22.2 No. 94.2-07 (R2012), CAN/CSA-C22.2
No.60079-0:11, CAN/CSA-C22.2 No.60079-15:12, CAN/CSA-C22.2
No.61010-1-12, CAN/CSA No.60529-05 (R2010)
YH8000-S2 (ATEX)
Type of protection: II 3 G Ex nA ic IIC T5 Gc
Enclosure rating: IP65 (In accordance with EN 60529)
Applicable standards: EN 60079-0: 2012+A11: 2013, EN 60079-11: 2012, EN 60079-15: 2010
YH8000-E2 (IECEx)
Type of protection: Ex nA ic IIC T5 Gc
Enclosure rating: IP65 (In accordance with IEC 60529)
Applicable standards: IEC 60079-0: 2011, IEC 60079-11: 2011, IEC 60079-15: 2010
2.2.2 IF8000 Isolation Flanges
A process isolation flange protects the TDLS8000 from the process gas pressure and the heat,
dust, and corrosive elements of the process gas. A process isolation flange must be installed in
the following situations.
• When the process gas pressure exceeds 500 kPa
• When the process temperature is high and the temperature of the process window area
exceeds 55ºC even when process window purge is performed.
• When the process dust level is high and the adherence of dust or intrusion of corrosive
elements cannot be prevented even when process window purge is performed.
The IF8000 isolation flanges can be used for additional protection in in-situ or bypass
installations.
Note: Must use in conjunction with alignment flanges
3rd Edition: Jun. 10, 2016-00