Vigilantplant TDLS8000, User Manual

Page: 244 / 320

<Appendix 2 Constructing Local HMI Connection Cables>
App.2-1
IM 11Y01D01-01EN
Appendix 2 Constructing Local HMI
Connection Cables
To connect a YH8000 HMI unit as a local HMI to the TDLS8000 sensor control unit (SCU), use
the special YH8000 option cable (option code: /C).
This section explains how to terminate this cable.
NOTE
• Before performing cable termination, pass the cable through cable glands. After crimping
the communication connector, the connector cannot be passed through the cable glands.
• Be careful of the cable gland orientation. The end with the screw section of the cable gland
is the connector end.
• To maintain the TDLS8000 performance and functionality, be sure to use the optional
dedicated cable.
l
Required components and tools
• Wire cutter
• Pliers
l
Pretreatment
Before terminating the special cable, pass the cable through cable glands (for 1/2NPT or M20).
Apply the cable glands from the unterminated end of the special cable.
After crimping the communication connector (RJ45 modular plug), the cable cannot be passed
through the cable glands.
Cable glands
Communication connector (supplied with the dedicated cable)
Crimped
Pass the cable through them
before crimping the
communication connector.
Figure 1 Local HMI connection cable
3rd Edition: Jun. 10, 2016-00