Vigilantplant TDLS8000, User Manual

Page: 172 / 320

<8. YH8000 HMI Unit>
8-21
IM 11Y01D01-01EN
8.7.2 TDLS8000 Selection Screen
When multiple TDLS8000s are connected, a TDLS8000 selection screen appears when
switching to the
alarm screen or information screen. Selecting the target TDLS8000 and
touching OK will display the alarm screen or information screen of the selected TDLS8000.
Analyzer number
Tag name
Alarm icon
Figure 8.24 TDLS8000 selection screen (when three TDLS8000 are connected)
Analyzer number
Shows analyzer numbers 1 to 4.
Tag name
Shows the tag names assigned to each TDLS8000. Serial numbers are displayed if tag
names are not assigned.
Alarm icon
If an alarm is occurring on the TDLS8000, an alarm icon is displayed. If both a warning
and a fault are occurring, the fault icon is displayed.
When multiple TDLS8000s are connected, the connected TDLS8000s are shown on the setup
target selection screen when switching to the
configuration screen. Selecting the target
TDLS8000 and touching OK will display the password input screen of the selected TDLS8000.
Analyzer number
Tag name
Alarm icon
HMI selection
Figure 8.25 Setup target selection screen (when three TDLS8000 are connected)
Analyzer number
Shows analyzer numbers 1 to 4.
3rd Edition: Jun. 10, 2016-00