Vigilantplant TDLS8000, User Manual

Page: 256 / 320

<Appendix 4 YH8000 Menu Tree>
App.4-1
IM 11Y01D01-01EN
Appendix 4 YH8000 Menu Tree
This section provides the tree structure of the setup and execution menus of the YH8000 HMI
unit.
(1) TDLS8000 Tunable Diode Laser Spectrometer operation panel
The TDLS8000 setup and execution menu tree is shown below. The menu for a TDLS8000 with
two-gas measurement specification is indicated here. Therefore, some items will not appear in a
TDLS8000 with one-gas measurement specification.
=> Select analyzer => Input password =>
1st 2nd 3rd 4th Tab Item
Execution Calibration Manual Zero Calibration Zero Calibration
Span Calibration Span Calibration
Semi-Auto Zero Calibration Zero Calibration
Span Calibration Span Calibration
Zero + Span Calibration Zero + Span Calibration
Restore Zero Calibration Restore Zero Calibration data
Span
Calibration
Gas1 Restore Span Calibration data
(Gas1)
Gas2 Restore Span Calibration data
(Gas2)
Clear Calibration Alarm Clear Calibration Alarm
Validation Manual Offline Validation 1 Offline Validation 1
Offline Validation 2 Offline Validation 2
Online Validation 1 Online Validation 1
Online Validation 2 Online Validation 2
Semi-Auto Offline Validation 1 Offline Validation 1
Offline Validation 2 Offline Validation 2
Offline Validation 1+2 Offline Validation 1+2
Online Validation 1 Online Validation 1
Online Validation 2 Online Validation 2
Clear Validation Alarm Clear Validation Alarm
Transmission Adjustment Transmission Adjustment
Loop Check Analog
Output
AO-1 Loop check mode
AO-1 Check output
AO-2 Loop check mode
AO-2 Check output
Digital Output DO Loop check mode
DO Check output
Fault Loop check mode
Fault Check output
Valve SV-1 Loop check mode
SV-1 Check output
SV-2 Loop check mode
SV-2 Check output
Auto Release Auto release time
System Clear Latched Alarms Clear Latched Alarms
3rd Edition: Jun. 10, 2016-00