EtherNet/IP
vacon • 153
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
9
9.2.1.4.1.
I
NSTANCE
A
TTRIBUTES
Instance Attribute “Status”
This attribute presents the status of the TCP/IP network interface.
Instance Attribute “Configuration Capability”
This attribute presents the capability flags (that is, the support for the optional network
configuration capability) of the TCP/IP network interface.
Table 117. Status Bit Descriptions
Bit(s)
Called
Definition
0-3
Interface Con-
figuration Status
Indicates the
status of the
interface config-
uration attribute
Value
Definition
0
The Interface Configuration
Attribute has not been configured
1
The Interface Configuration
Attribute contains valid configura-
tion obtained from BOOTP, DHCP
or non-volatile storage.
2
The IP address member of the
Interface Configuration Attribute
contains valid configuration,
obtained from hardware settings
3-15
Reserved for future use
4
Mcast Pending
Indicates a pending configuration change in the TTL Value and/
or Mcast Config attributes.
5
Interface Con-
figuration Pend-
ing
Indicates a pending configuration change in the Interface Con-
figuration attribute.
6
AcdStatus
Set(1) Address Conflict Detected, Clear(0) No Address Conflict
Detected
7-31
Reserved
Always zero
Table 118. Configuration capability bit descriptions
Bit(s)
Called
Definition
0
BOOTP Client
Supports BOOTP (FALSE)
1
DNS Client
Supports capable of resolving DNS names
(FALSE)
2
DHCP Client
Supports DHCP (TRUE)
3
DHCP-DNS Update
Always zero
4
Configuration Settable
TRUE, if configuration settable
5
Hardware Configurable
Configuration can be obtained from hardware
settings (FALSE)
6
Interface Configuration Change
Requires Reset
Configuration change results in reset (FALSE)
7
AcdCapable
Supports ACD (TRUE)
8-31
Reserved
Reserved, always zero
Summary of Contents for optea
Page 2: ......
