Commissioning
vacon • 61
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
6
6.1.3
Communication protocol
The OPTEA and OPTE9 option boards come with several fieldbus protocols. The user can select the
one used in their network from the list. Only one protocol can be active at a time. Since OPTEA
firmware version V002 and OPTE9 firmware version V008, you can also select "none" from the list.
With this selection, no fieldbus protocol is active in option board. This also means that the option
board does not generate fieldbus timeout fault if the Ethernet cable is not connected. The PC tool
connections and SNTP time updates are possible in this mode.
Speed/Duplex
Undefined (1),
10 HD (2),
10 FD (3),
100 HD (4),
100 FD (5)
Shows current Ethernet link speed and duplex
value.
Sub menu: EtherNet/IP
EIP Product Code
-
Currently used EtherNet/IP Product Code
EIP Output Instance
0 - 161
Currently used output instance. Zero is shown
if EtherNet/IP is not the active protocol
EIP Input Instance
0 - 167
Currently used input instance. Zero is shown if
EtherNet/IP is not the active protocol|
Sub menu: PROFINET IO
Name Of Station
-
Name of station value truncated to be shown in
panel. It shows partial Name Of Station value.
This value is visible only in NX family drives.
IOC NOS
-
Name Of Station of the IO controller, i.e. the
PLC connected to this board
System Redundancy
None (1),
Fault (2),
Backup (3),
Primary only (4),
Redundant (5)
State of system redundancy if active. Visible
with OPTEA board.
Sub menu: SNTP
SNTP status
Stopped (1),
Internal error (2),
Invalid configuration (3),
Finding server (4),
Failed (5),
Synchronized Time (6),
Lost connection (7)
Shows current SNTP status. Value is stopped
when SNTP is not enabled.
Server IP P1
0…255
Currently active SNTP server address part 1
Server IP P2
0…255
Currently active SNTP server address part 2
Server IP P3
0…255
Currently active SNTP server address part 3
Server IP P4
0…255
Currently active SNTP server address part 4
Last Update time
0…65535
Seconds since time update was received from
network. Value shows zero until first update
since drive startup.
Name
Range
Description
Summary of Contents for optea
Page 2: ......
