Installation
vacon • 41
Local contacts: https://www.danfoss.com/en/contact-us/contacts-list/
5
5
Unless already done for the other control cables,
cut free the opening on the AC drive cover for the
fieldbus cable (protection class IP21).
NOTE:
Cut the opening on the same side you
have installed the board in!
6
Remount the AC drive cover and run the cable as
shown in picture.
NOTE:
When planning the cable runs, remember
to keep the distance between the fieldbus cable
and the motor cable at a
minimum of 30 cm
. It is
recommended to route the option board cables
away from the power cables as shown in the pic-
ture.
9202.emf
Fieldbus
cables
Summary of Contents for optea
Page 2: ......
