Toshiba TP3000 Instruction Manual Download Page 178

Page: 178 / 283

STE 85412

7-11

TP3000

series Robot Controller

Step 3: Step execution

Press the [RUN] key in the Servo ON state. After the program is executed for one

instruction, it stops.

The [STOP] key of the TP3000 switches to the [RUN] key, and the operation to wait for

the next step (waiting for the [RUN] key) is activated.

Cautions

•

To stop the step operation, press the ESC key to quit.

To execute a step in another run mode, select the run mode again.

During step execution, a step to be executed is displayed in the command filed of

the teach pendant.

If a step operation is executed against a multitask program, tasks are not changed

over. In addition, the TASK command, SWITCH command or any other

command related to the multitask is not executed, either.

Summary of Contents for TP3000




























































































































































































































































































Search results

Summary of Contents for TP3000

Reviews:

Related manuals for TP3000

Brands by name

Popular brands

Toshiba TP3000, Instruction Manual

Search results

Summary of Contents for TP3000

Reviews:

Related manuals for TP3000

Brands by name

Popular brands