STE 85412
7-8
TP3000
series Robot Controller
Step 2: Entering the speed override rate
Press one of the [5], [10], [15], [20] and [25] keys on the keyboard. The value of the key
you pressed is copied to the command line, and the key sheet changes to number input.
A fine value can be set on the command line.
If you want to directly enter a numeric value from the beginning without using the [5],
[10], [15], [20] and [25] keys on the keyboard, press the [NUM] key. Directly enter a
value of the override rate on the command line.
