Toshiba TP3000 Instruction Manual Download Page 107

Page: 107 / 283

STE 85412

5-6

TP3000

series Robot Controller

Cautions



The position data name can consist of up to 10 characters.

When entering a name on the command line, if "(" is not entered within the first

eight characters, no more than eight characters can be entered.



Array type position data can consist of up to 20 characters.

When entering a name on the command line, no more than 20 characters can be

entered.



When a coordinate system is set, the work coordinate system is set temporarily.



If the input name is illegal, a message saying "ILLEGAL NAME" is displayed on

the command line and no data is changed. Press any key, and the system

returns to the name editing mode.



If the specified name already exists, a message of "DUPLICATE NAME" is

displayed on the command line and no data is changed. Press any key, and the

system returns to the name editing mode.

5.3.2

Edit Various Elements

Functional Explanation

Edits various elements.

Operating Procedure

Step 1: Selecting an element

Position the cursor on the element cell you want to edit, and press the [EXE] key.

The cursor moves to the command line. At this time, copy the source data onto the

command line.

Summary of Contents for TP3000




























































































































































































































































































Search results

Summary of Contents for TP3000

Reviews:

Related manuals for TP3000

Brands by name

Popular brands

Toshiba TP3000, Instruction Manual

Search results

Summary of Contents for TP3000

Reviews:

Related manuals for TP3000

Brands by name

Popular brands