STE 85412
5-2
TP3000
series Robot Controller
Step 2: Selecting the data editor
Press the [EDIT] key on the top key sheet in the TEACHING mode. The key sheet and
screen displays change, and the [PRG EDIT], [DATA EDIT] and [PAR EDIT] keys
appear. Next, press the [DATA EDIT] key.
Step 3: Specifying a file
A list of the data files inside the controller appears on the screen.
To select an existing file, select the desired file with the up and down cursor keys and
then press the [EXE] key.
The data editor starts.
To create a new file, press the [NEW] key.
When the [NEW] key is pressed, the cursor moves to the command line; enter the
desired file name.
Once the file name has been determined, press the [EXE] key.
The data editor starts.
