Tecnoalarm TP16-256, Installer Manual

Page: 87 / 248

TP16-256 - Installer Manual Set-up
3-7
3.2.1 ADDITION OR DELETION OF MODULES
Enter hardware configuration by clicking on the opposite icon.
ADDITION OF MODULES
Select Add in the hardware configuration window and select
the module to be connected, e.g. LCD300/S.
On the screen is viewed the opposite message.
Commands available
z
Yes to confirm the addition of the module selected
z
No to undo the addition of the module selected
Click on OK to confirm and quit hardware configuration.
Click on Abort to undo the changes to the hardware
configuration viewed.
If you confirm the addition of the module, it is added to the
system configuration viewed.
The console is added to the system
configuration viewed.
Next to the module the dipswitch address
is shown.