Tecnoalarm TP16-256, Installer Manual

Page: 172 / 248

Programming by Console Installer Manual - TP16-256
5-32
Options 2
Signaling NV [ ]
Options 3
Siren NV [ ]
Options 4
Enabling AM [ ]
Options 5
Signaling AM [ ]
MENU
21 21 21 21 21
5.16.2 PROGRAM RELATED EVENTS
SELECTION OF THE PROGRAM
+
yw
to select the program (from 1 to 32)
+
#
YES to confirm the selection
CHANNEL ASSOCIATION
+
yw
to select the channel (A...H)
Viewing of the current settings
[ ] Channel not associated to the event selected
[ # ] Channel associated to the event selected
Commands available
+
#
YES to associate the channel to the event
+
*
NO to undo the association
+
EXIT to accept programming and quit the submenu
PROGRAMMING OF THE REPORT CODE
See § 5.16.1
5.16.3 ALL THE OTHER EVENTS
CHANNEL ASSOCIATION
+
yw
to select the channel (A...H)
Viewing of the current settings
[ ] Channel not associated to the event selected
[ # ] Channel associated to the event selected
Commands available
+
#
YES to associate the channel to the event
+
*
NO to undo the association
+
EXIT to accept programming and quit the submenu
PROGRAMMING OF THE REPORT CODE
See § 5.16.1
5.17 PROGRAMMING OF THE OPTIONS
+
yw
to select the menu (21)
+ #
YES to confirm the selection
Submenus
z
Enabling NV (enabling of supervision)
If supervision is enabled and one of the wireless devices associated to the control
panel does not the send any correct data for a period of time longer than the
supervision intervall programmed (see § 5.8), supervision alarm is released.
[ # ]
Supervision enabled
z
Signaling NV (enabling of supervision alarm signaling)
Permits enabling/disabling of supervision alarm signaling through the consoles,
supervisory boards and output expansion modules.
[ # ]
Supervision alarm signaling enabled
z
Siren NV (enabling of siren activation for supervision alarm)
Permits enabling/disabling of supervision alarm signaling through the sirens. The
sirens observe the tamper alarm time.
[ # ]
Siren activation for supervision alarm enabled
z
Enabling AM (enabling of antimasking control)
If the antimasking control is enabled and the wireless receiver captures an
interference with a frequency identical with the transmission frequency of the
wireless devices associated to the control panel that persists for a period of time
longer than the antimasking filter programmed (see § 5.8), antimasking alarm is
released.
[ # ]
Antimasking control enabled
z
Signaling AM (enabling of antimasking alarm signaling)
Permits enabling/disabling of antimasking alarm signaling through the consoles,
supervisory boards and output expansion modules.
[ # ]
Antimasking alarm signaling enabled
Low battery
Channel A
[ ]
Report code
7E
Menu 21
Options
Options 1
Enabling NV [ ]