Tecnoalarm TP16-256, Installer Manual

Page: 110 / 248

Programming by PC Installer Manual - TP16-256
4-18
4.2 CONFIGURATION OF THE TELEPHONE SECTION
Permits setting of the functioning parameters of the telephone
section. Open the telephone configuration tables by clicking on
the opposite icon.
On the screen is viewed:
The telephone configuration tables permit to programming of the following parameters:
z
Telephone channels and general telephone parameters
z
Telephone communicator with GSM module
z
Report codes
z
Opening message-Vocabulary
z
Voice messages and activation time of the remote controls
4.2.1 TELEPHONE CHANNELS AND GENERAL TELEPHONE PARAMETERS
The control panel can transmit alarm or system status signaling either digitally or with the help of voice messages
that are composed automatically by the vocabulary.
During the digital communications the control panel transmits/receives data regarding alarms and system status
using a special protocol developped by Tecnoalarm or one of the most common digital transmission formats.
Programming is made using the digital Tecnoalarm protocol.
The control panel provides 8 individually programmable telephone channels (A, B, C, D, E, F, G, H). Every channel
can be programmed with a description, 2 telephone numbers (pri reserve), an individual transmission
protocol and ID code permitting the digital and vocal communication with any device whatsoever.
The principal telephone number is always called first, the reserve number is only called if the call at the principal
number has been unsuccessful (line busy or no answer).
The telephone channels can be blocked by the user by pressing the star key on the telephone dial. The
communicator block can be configured so as to affect only determined channels.