Tecnoalarm TP16-256, Installer Manual

Page: 159 / 248

TP16-256 - Installer Manual Programming by Console
5-19
MENU
9 9
9 9 9
z
Technical alarm
The siren is actived if the technical zone in alarm is not included in any program
at all or if it is included in one of the programs the siren is associated to.
Sound type available:
„
Sound 1 - Bidirectional sweep tone (default setting)
„
Sound 2 - Monodirectional sweep tone
„
Sound 3 - Bitone
z
Prealarm
The siren is actived in case of prealarm of at least one of the programs it is
associated to. The sound type is fixed.
z
Signaling
The siren is actived in case of arming/disarming of the programs it is associated
to. The sound type is fixed.
z
Chime
The siren is actived if the chime zone opened is not included in any program at all
or if it is included in one of the programs the siren is associated to. The sound
type is fixed.
z
Attributes
„
Enabling antifoam
„
Enabling antidrilling
z
Activation mode
Determines the activation mode of the siren for the selected events:
„
Not active The siren is not activated at all
„
Sounding Only sounding is activated
„
Flashing light Only flashing light is activated
„
So Flashing light Sounding and falshing light are activated
Viewing of the current settings
[ ] Function disabled
[ # ] Function enabled
Commands available
+ yw
to select the function
+
#
YES to select and activate the function
+
*
NO to deactivate the function
+
EXIT to confirm and quit the submenu
5.10 PROGRAMMING OF THE TIMERS
+
yw
to select the menu (9)
+
#
YES to confirm the selection
Submenu
z
Test call Configuration of the remote functioning check of the control
panel
z
Timers Configuration of the 32 timers
z
Acc. periods Programming of 8 access periods for the codes, keys and
wireless keys
Commands available
+
yw
to select the function
+
#
YES to confirm the selection
5.10.1 TEST CALL
The test call is a remote functioning check of the control panel that is executed with
scheduled intervals. It consists in one or more telephone calls made by the telephone
channels programmed accordingly (see programming of the report codes) towards the
telephone number/s programmed.
Submenu
z
Period Values from 0 to 255
z
Attr. period Time unit (not active, minutes, hours, days) that will be
associated to the value entered before
z
Armed Permits binding of the execution of the test call to system
status (i.e. always or only if the control panel is armed)
z
Begin. time Defines the starting hour of the test call cycle
Commands available
+
yw
to select the parameter
+
#
YES to confirm the selection
Menu 9
Timers
Timers 1
Test call
Timers 2
Timers
Timers 3
Acc. periods
Test call 1
Period
Test call 2
Attr. Period
Test call 3
Armed [ ]
Test call 4
Begin. time [ : ]