Tecnoalarm TP16-256, Installer Manual

Page: 100 / 248

Programming by PC Installer Manual - TP16-256
4-8
.
Select the function by clicking on the function key, then check the zones to be associated. The zones may be
identified either by the zone number or the description assigned beforehand.
Once you have finished the zone-function association, press:
z
OK to confirm and close the zone configuration tables
z
Abandon to undo the zone-function association
4.1.3 ZONE-PROGRAM ASSOCIATION
Open the zone configuration tables and select the zone-program window by clicking on the tab Zone-Programs .
On the screen is viewed:
The zone-program window permits the creation of the programs.
The program is a group of zones (1 to 256) that are enabled altogether for the detection of alarms upon arming of the
program. The programs can be armed singularly, i.e. one program at a time (single arming), or simultaneously, i.e.
several programs at the same time (multiple arming).
The zones of a determined program are enabled simultaneously for the detection of alarms, exception made of the
delayed, walk through and common zones. The delayed and the walk through zones will be enabled upon expiry of
the exit time associated. The common zones will be enabled only if all the programs they are included in are armed.
The zones that are not included in the programs armed, are not enabled for the detection of alarms, exception made
of the technical, hold-up and tamper zones that are always enabled even if the system is completely disarmed.
The control panel TP16-256 permits the creation of maximum 32 programs, every program can be composed of
maximum 256 zones.