Tecnoalarm TP16-256, Installer Manual

Page: 233 / 248

TP16-256 - Installer Manual Special Procedures - Appendix B
B-5
RESTORE
After firmware upgrade or the replacement of the CPU board
restore the configuration of the wireless section and upload all
the relative data on the control panel again.
z
Click on the Send (Restore) button
On the screen is viewed:
Commands available
z
Yes to confirm and procede with the upload of the
configuration of the wireless section
z
No to abandon the upload of the configuration of
the wireless section
Pressing Yes , the process is completed and on the screen is
viewed the opposite message.
Commands available
z
OK to confirm and quit
WARNING
The backup is heartily recommended before every firmware upgrade or if you have to replace the
CPU board in order to avoid losing data regarding the wireless devices.
WARNING
Confirming the upload of the configuration of the wireless section previously stored on the PC
(backup), all the data relating to the wireless devices associated to the system currently present in
the control panel will be overwritten. In case of firmware upgrade or replacement of the CPU board,
however, there will be no relevant data to overwrite.