Tecnoalarm TP16-256, Installer Manual

Page: 177 / 248

TP16-256 - Installer Manual Programming by Console
5-37
MENU
18 18
18 18 18
Menu 18
Esclusion
MENU
1 1
1 1 1
Menu 1
Remote ctrl
Remote ctrl 1
Rem. ctrl 01
Rem. ctrl 01 1
Activation [ # ]
Learn.
Waiting
Learn.
Completed
LEARNING OF A NEW KEY
If the selected key has not yet been programmed (or the existing one has been
deleted), the control panel is put into the wait mode and on the display is viewed
Learn. Waiting (the system is ready for learning).
Insert the electronic key to be learnt into the key reader.
The code of the key is stored in the memory of the controle panel.
Once the process has been completed, on the display is viewed
Learn. Completed .
Remove the electronic key from the key reader.
The control panel is put into the waiting mode for learning of other electronic keys.
OTHER SETTINGS - WHEN REQUIRED
5.20 ACTIVATION/DEACTIVATION OF THE REMOTE
CONTROLS
+
yw
to select the menu (1)
+
#
YES to confirm the selection
SELECTION OF THE REMOTE CONTROL
+
yw
to select the remote control (1 to 16)
+ #
YES to confirm the selection
Viewing of the current settings
[ ] Remote control not active
[ # ] Remote control active
Commands available
+
#
YES to activate the remote control selected
+
*
NO to deactivate the remote control selected
+
EXIT to accept programming and quit the submenu
5.21 EXCLUSION OF MODULES/ZONES
+ yw
to select the menu (18)
+
#
YES to confirm the selection
The menu permits the voluntary exclusion of a device or a zone.
Submenus
z
Zones Exclusion of the zones selected (from 1 to 256)
z
WL sirens Exclusion of the wireless sirens selected (from 1 to 4)
z
WL consoles Exclusion of the wireless consoles selected (from 1 to 4)
z
WL keys Exclusion of the wireless keys selected (from 1 to 60)
z
Consoles Exclusion of the consoles selected (from 1 to 32)
z
Keypoints Exclusion of the keypoints selected (from 1 to 16)
z
Superv. brds Exclusion of the supervisory boards/output expansions
selected (from 1 to 32)
z
Tecnocell Exclusion of the telephone communicator with GSM module
z
Modules Exclusion of the modules selected (from 1 to 32)
z
WL module Exclusion of the wireless module selected (1 or 2)
SELECTION OF THE DEVICE
+
yw
to select the device
+
#
YES to confirm the selection
Viewing of the current settings
[ ] Device or zone active
[ # ] Device or zone excluded
Commands available
+
#
YES to exclude the selected device
+ *
NO to enable the selected device
+
EXIT to accept programming and quit the submenu