Tecnoalarm TP16-256, Installer Manual

Page: 88 / 248

Set-up Installer Manual - TP16-256
3-8
DELETION OF MODULES
Select Delete in the hardware configuration
window and select the module to be
connected, e.g. LCD300/S.
On the screen is viewed the oppostie message.
Commands available
z
Yes to confirm the deletion of the module
selected
z
No to undo the deletion of the module
selected
Click on OK to confirm and quit hardware
configuration.
Click on
Abort to undo the changes to the
hardware configuration viewed.
If you confirm the deletion of the module, it is
removed from the system configuration viewed.
MODULES AVAILABLE
The default hardware configuration of the control panel includes only the CPU board. The CPU boards provides 16
zone inputs, 2 programmable outputs (+SRA and -SRINT) for the control of the indoor and outdoor sirens and 2
programmable logic outputs (OUT1+ and OUT2-).
Below the modules compatible with the control panel are listed:
Input expansion modules
SPEED ALM8
Provides 8 zone inputs, 2 programmable outputs (+SRA and -SRINT) for the control of the indoor and outdoor sirens
and 2 logic outputs (negative voltage)
SPEED 8
Provides 8 zone inputs and 2 logic outputs (negative voltage)
SPEED 8 STD
Provides 8 zone inputs - no logic output
SPEED 4
Provides 4 zone inputs and 1 logic output (negative voltage)
Control units
LCD300/S
Console permitting programming and control of the control panel. Provides 16 keys, 36 coloured signaling leds, lcd
display with 2 lines of 16 characters each and loudspeaker for voice report. Permits the control of 16 programs.
TP SDN
Electronic keypad permitting the control, i.e. arming/disarming and by-pass, of maximum 4 programs
TP SK6N
Key reader with minikeypad permitting the control, i.e. arming/disarming and by-pass, of maximum 6 programs
TP SKN
Key interface permitting the connection of key readers for the control of maximum 3 programs.
RSC input expansion modules
SPEED 8 PLUS
Provides 4 bus conector for connection of 8 detectors Bus
SPEED 4 PLUS
Provides 2 bus conector for connection of 4 detectors Bus