Tecnoalarm TP16-256, Installer Manual

Page: 133 / 248

TP16-256 - Installer Manual Programming by PC
4-41
4.5 CONFIGURATION OF THE WIRELESS SIRENS AND CONSOLES
Open the wireless configuration tables by clicking on the
opposite icon.
On the screen is viewed:
4.5.1 CONFIGURATION OF THE WIRELESS SIRENS
The control panel pilots up to 4 wireless sirens individually programmable with the following parameters:
z
Time parameters (sounding time, activation delay, blinking time)
z
Functional parameters (volume of sounding and functioning mode, indoor or outdoor siren)
z
Activation mode (deactivated, sounding, blinking or sounding and blinking) for alarm, prealarm, technical alarm or
signaling.
PROGRAMMING OF THE TIME PARAMETERS
To program the time parameters click on the items and enter
the time requested:
z
Sounding (mm:ss)
Determines the sounding time in case of alarm.
z
Delay of activation of sounding (mm:ss)
Determines the interval between the detection of an alarm
and the activation of the siren.
z
Flashing light (mm:ss)
Determines the blinking time in case of alarm or
technical alarm.
PROGRAMMING OF THE FUNCTIONAL PARAMETERS
z
Volume of sounding
To set volume of sounding for prealarm or signaling move
the cursor.
Volume of sounding for alarm or technical
alarm is always set at the maximum.
z
Siren mode
The siren can be programmed so as to work either as
an indoor or an outdoor siren.