Tecnoalarm TP16-256, Installer Manual

Page: 156 / 248

Programming by Console Installer Manual - TP16-256
5-16
Time 16
Supervision
MENU
7 7 7 7 7
jamming signal must persist before the alarm is released.
z
Supervision (supervision interval (hh:mm))
Defines the interval between one test transmission (supervision) and the other by
the wireless devices associated.
Supervision alarm is released if one of the wireless devices associated does not
transmit any data for a period of time superior to the supervision interval
programmed.
Commands available
+
yw
to select the parameter
+
#
YES to confirm the selection
+
EXIT to accept programming and quit the submenu
5.9 PROGRAMMING OF THE OUTPUTS
+ yw
to select the menu (7)
+
#
YES to confirm the selection
Submenus
z
Sirens Association of the sirens to the programs
z
PGM Association of the logic output PGM to the programs
z
Buzzer Configuration of the buzzer of the console to the programs
z
Programmable Definition of the kind of output and the stand-by status of the
logic outputs of the expansion modules
z
Bus sirens Selection and functioning of the bus sirens
5.9.1 ASSOCIATION OF THE SIREN
Defines if the siren is activated in case of alarm of the program selected.
Viewing of the current settings
[ ] Siren not associated to the program
[ # ] Siren associated to the program
Commands available
+
yw
to select the program (from 1 to 32)
+
#
YES to associate the siren to the program selected
+ *
NO to cancel a possible existing association
+
EXIT to accept programming and quit the submenu
5.9.2 ASSOCIATION OF THE LOGIC OUTPUT PGM
Defines if the logic output PGM is activated in case of alarm of the program selected.
Viewing of the current settings
[ ] Logic output PGM not associated to the program
[ # ] Logic output PGM associated to the program
Commands available
+
yw
to select the program (from 1 to 32)
+
#
YES to associate the logic output PGM to the program selected
+ *
NO to cancel a possible existing association
+
EXIT to accept programming and quit the submenu
5.9.3 CONFIGURATION OF THE BUZZER
Permits parameterization of the buzzer on the consoles:
z
Chime
„
Continuous buzzer (the buzzer sounds until the zone is open)
„
Pulse buzzer (the buzzer sounds for 2 seconds on every opening of the zone)
z
Exit (exit time)
The buzzer sounds during the exit time.
z
Prealarm
The buzzer sounds during the entry time.
z
Alarm
The buzzer sounds during the alarm time.
z
Warn. by-pass (end-of-by-pass warning)
The buzzer sounds while the end-of-by-pass warning is displayed.
z
Warn. autom.
The buzzer sounds while the warning of imminent automatic arming (by
timer) is displayed.
Menu 7
Outputs
Outputs 1
Sirens
Outputs 2
PGM
Outputs 3
Buzzer
Buzzer 1
Pulse chime [ ]
Buzzer 2
Exit [ ]
Buzzer 3
Prealarm [ ]
Buzzer 4
Alarm [ ]
Outputs 4
Programmable
Output 5
Bus sirens