Tecnoalarm TP16-256, Installer Manual

Page: 144 / 248

Programming by Console Installer Manual - TP16-256
5-4
Zone 001 1
Not associated
Zone 001 1
Ctrl panel Zx
Zone 001 1
WL ext.
Zone 001 1
Module 01 Zx
MENU
4 4
4 4 4
5.3 ZONE CONFIGURATION
+
yw
to select the menu (4)
+
#
YES to confirm the selection
SELECTION OF THE ZONE
+
yw
to select the zone (from 1 to 256)
+
#
YES to confirm the selection
Submenus
z
Message Programming of the voice message associated to the zone
(zone decription)
z
Input association Association of the physical inputs of the CPU board and the
expansion modules to the logical inputs (zones from 1 to 256)
of the control panel (creation of the list of zones controlled by
the control panel)
z
Type Definition of the zone type
z
Connection Definition of the contact type of the zone (for wired zones only)
z
Filter Definition of the zone filter
z
Repetitions Definition of the maximum number of alarm cycles
z
Learning Self-programming of the wireless device associated to the
zone (for wireless zones only)
5.3.1 PROGRAMMING OF THE VOICE MESSAGE
The voice message can be composed of maximum 4 words selected from the
onboard vocabulary.
Commands available
+
#
YES to go forward to the next word (from 1 to 4)
+
*
NO to delete the word selected
+
yw
to select the previous/next word of the vocabulary
+
MEM to go forward to the first word starting with next letter of the
alphabet
+
EXIT to accept programming and quit the submenu
Pressing the EXIT key, on the display is viewed the opposite message:
+
#
YES to accept and quit (the voice message will be used as zone
descripton too)
+
*
NO to deny and quit (the voice message will only be used for voice
alarm messages and the voice report of the console)
5.3.2 INPUT-ZONE ASSOCIATION (CREATION OF THE ZONE LIST)
TP16-256 controls a total of 256 zones freely associable to the physical zone inputs
provided by the hardware installed:
z
CPU board with 16 inputs (basic configuration)
z
Max. 32 input expansions connected via serial bus RS485 with a total of up to
256 inputs
z
Max. 2 wireless receiver-transmitters providing a total of up to 128 wireless zones
Since the maximum hardware configuration of the system provides many more than
256 inputs, it is indispensable to select the inputs to be controlled. The association of
the physical inputs of the CPU board and the expansion modules to the zones (from 1
to 256) is reassumed in the zone list.
Commands available
+
yw
to select the previous/next input (the inputs are viewed in
sequence from the first to the last of every module)
+
0 to select the next hardware module
The order of appearance:
1. Not associated
2. Control panel (CPU board) from zone 1 to zone 16
3. Wireless expansion from zone 1 to zone 128
4. Module 01 from zone 1 to zone 8
5. Modules 02 to 32 from zone 1 to zone 8
+
EXIT to confirm and quit
Menu 4
Zones
Zones 1
Zone 001
Message
1 =
Zone 001
Ass. inputs
Zone 001 1
Ctrl panel Z1
Copy into desc.?
*NO
#YES