Studer Vista, Operating Instructions Manual

Page: 269 / 713

D950/Vista7 Digital Mixing System
Date printed: 27.08.03 SW V3.3
Au 5-7
•
WRITE TO: LEVEL MATCH
,
NEXT CHANGE
,
END
, and
PUNCH OUT
will
write the value at the time of punch-out possibly further ahead, rather
than immediately stop recording. The neutral setting is
PUNCH OUT
.
This will record no more after punch-out.
•
EXTEND BACK TO:
(D950) /
WRITE TO:
(Vista)
BEGIN
,
PUNCH IN
: These
keys can only be activated before starting a mix pass. They will write
the value at the time of punch-out as a constant value back to the begin
(setting
BEGIN
) or back to the point where the user punched in (setting
PUNCH IN
).
Application Examples: In WRITE mode:
1 Correcting a constant value throughout a mix (
WRITE TO: BEGIN
)
2 In a music mix, when a solo is played: For finding a value while listen-
ing and applying the final value to the whole passage (
WRITE TO:
PUNCH IN
).
In TRIM mode:
1 Trim an object back to the beginning of a mix while keeping its move-
ments (
WRITE TO: BEGIN
)
2 Trim an object by a constant value between punch-in and punch-out
point, while keeping the movements (
WRITE TO: PUNCH IN
).
Setup Keys [4] (D950 only): For storing or recalling mix option settings which define the behavior of
the automation system. Such a preset contains all option settings and can
either be assigned to specific keys or just stored in files.